VIN and vehicle review
Confirm the donor vehicle before finalizing parts.
Rolls-Royce · Ghost · Bespoke Conversion
Rolls-Royce Ghost Bespoke Exterior & Interior Conversion
A verified luxury transformation combining a reworked exterior body kit, visible carbon-fiber details and an orange-and-black cabin. This page connects the finished project with the relevant Rolls-Royce brand, exterior, interior and conversion-kit categories.
Completed Rolls-Royce Ghost conversion
A selected finished-project view showing the principal front bumper, grille and exterior carbon relationships.
Vehicle-specific fitment
Plan body, interior and electrical integration.
Pre-dispatch checks
Review visible finish and verified component scope.
Worldwide supply
Air and sea cargo options after manufacturing.
Complete conversion product scope
Exact Rolls-Royce Ghost parts covered by this project
The conversion is divided into five orderable product families. Customers may request the complete package or selected parts. Every component, material, finish, quantity and required function must be listed in the final quotation.
Exterior body kit
Front bumper, vertical grille and surround, lower grilles or mesh, side extensions, rear bumper, diffuser and exhaust surrounds.
Carbon-fiber package
Bonnet, front intake surrounds, fender or side vents, lower side extensions and selected rear carbon details.
Bespoke interior
Front and rear seat upholstery, headrests and embroidery, steering-wheel retrim, dashboard carbon fascia and selected door trim.
Headlight package
Matched left and right assemblies, optical and signature-light elements, housings, modules, cooling hardware and required adapters.
Custom wheel programme
Vehicle-specific wheel set with confirmed construction, diameter, width, offset, PCD, centre bore, load rating and finish.
Included: only the items named in the signed quotation and component schedule.
Not automatically included: tyres, TPMS, trademarked caps, coding, painting, installation, duties or insurance unless written into the order.
Complete vehicle transformation
One design direction from exterior to cabin
This project is presented as a complete design study rather than a collection of unrelated accessories. The front treatment establishes a stronger road presence, carbon-fiber elements provide technical contrast, and the interior develops its own recognizable orange-and-black identity.
The coordinated exterior and cabin design does not replace the vehicle-specific order specification. Exact compatibility, included components, materials, electrical functions and production scope must be confirmed for each vehicle before payment or manufacturing.
OWNSILENT reviews the VIN, model year, market specification and current vehicle condition before planning exterior panels, carbon components, upholstery work and retained vehicle functions.
01 · Exterior Parts · Conversion Body Kits
Rolls-Royce Ghost exterior conversion
The exterior chapter examines the completed front, side and rear relationships. Large conversion panels must be evaluated as a system because bumper depth, grille position, lighting clearances, exhaust openings and sensor locations all influence the final result.
Completed Rolls-Royce Ghost front conversion
The completed front view establishes the conversion through a deep lower bumper, vertical grille treatment and layered intake architecture.
Front bumper and grille relationship
A closer angle shows how the grille, lamp position and lower openings read together after fitting.
Custom rear bumper and diffuser
The rear conversion uses integrated exhaust surrounds and a structured lower diffuser to balance the more assertive front treatment.
Completed front three-quarter profile
The three-quarter view is used to review stance, panel relationships and the visual transition between front and side components.
Lower bumper and lighting detail
Lighting, mesh and lower aero surfaces require careful alignment so functional openings remain visually consistent.
Finished exterior from the front
The finished presentation confirms symmetry across the grille, lamps, bumper openings and lower corner treatments.
Front bumper and grille integration
The grille remains the primary Rolls-Royce visual reference. Its height, central alignment and relationship with the lamps should be inspected before the surrounding bumper surfaces are finalized.
Rear bumper, diffuser and exhaust openings
The rear assembly must account for exhaust position, parking sensors, lower mounting points and consistent gaps beneath the boot and quarter panels.
Trial fitting before final finishing
Large exterior components should be dry fitted before paint or final clear finishing. This allows technicians to correct mounting, clearances and surrounding panel relationships first.
02 · Exterior Parts · Carbon Fiber
Carbon-fiber components with controlled visual hierarchy
Carbon is concentrated around the bonnet, vents, intake surrounds and lower body line. Keeping these details within a planned hierarchy prevents the conversion from looking assembled from unrelated pieces.
Gloss carbon-fiber intake surround
Visible weave and a clear-coated surface add technical contrast without competing with the main body colour.
Carbon-fiber side vent
A bright central trim separates the carbon surface from the painted panel and reinforces the original luxury detailing.
Front carbon intake detail
The lower intake combines exposed carbon, mesh and a slim highlight line within one compact assembly.
Carbon bonnet focal point
The bonnet surface frames the Spirit of Ecstasy while retaining the central visual axis of the Rolls-Royce front end.
Carbon-fiber side extension
The lower extension connects front and rear treatments and makes the converted profile appear visually lower.
Bespoke fender vent
The fender detail demonstrates how carbon and metallic finishes can be combined without losing the vehicle's formal character.
Weave, symmetry and surface finish
Visible carbon should be reviewed for weave direction, left-to-right consistency, edge finishing and clear-coat appearance. Available material and finish specifications must be recorded in the quotation.
Fitment around painted panels
Carbon components interact with paint, seals, fasteners and adjoining trim. Professional installation helps protect the finish while maintaining consistent clearances and shut lines.
03 · Interior Parts · Bespoke Conversion
Orange leather, black inserts and carbon dashboard trim
The cabin uses orange leather as its dominant identity, supported by black seating inserts and broad carbon-fiber dashboard surfaces. Steering, seats and trim are shown together so customers can evaluate the complete composition rather than isolated material samples.
Orange-and-black front seats
The two-tone upholstery creates a clear cabin identity and coordinates the major seating surfaces with the steering wheel.
Driver seat upholstery profile
The side view makes the panel division, bolster colour and dark centre insert easier to inspect.
Embroidered Rolls-Royce headrest
The embroidered headrest anchors the seat design and must be approved together with leather colour and stitch specification.
Two-tone steering wheel
The steering wheel repeats the seat colour and brings the upholstery concept into the driver's direct field of view.
Carbon-fiber dashboard trim
A broad carbon dashboard surface provides a technical counterpoint to the warmer orange leather elements.
Door speaker and stitched leather
Small interface details remain important because speaker grilles, stitching and trim edges are viewed at close range.
Leather and colour approval
Colour, perforation, quilting, piping, stitching and panel division should be approved together. Reference images support discussion, while the confirmed material sheet controls production.
Seat functions and existing construction
The original seat structure, controls and installed safety systems must be reviewed before upholstery work. Functional requirements vary with the donor vehicle specification.
Dashboard and steering coordination
Repeating the accent colour across steering and selected cabin areas creates continuity. Carbon trim then provides a darker technical surface to balance the brighter leather.
04 · Specification and installation
A controlled path from enquiry to completed vehicle
A bespoke conversion involves interdependent exterior, interior and electrical decisions. Dividing the order into clear checkpoints makes it easier to confirm compatibility, control the visual specification and document what will be supplied.
- 01
Share VIN and images
Send model year, market specification and clear exterior and interior images.
- 02
Approve component scope
Confirm every exterior panel, carbon piece, upholstery area and required function in writing.
- 03
Review finish and quality
Use available production and pre-packing documentation to inspect the agreed visible specification.
- 04
Ship and install professionally
Select air or sea cargo and arrange installation with technicians experienced in luxury vehicle conversions.
Category and brand connections
Continue through the OWNSILENT catalogue
This project is connected to the Rolls-Royce brand and the product families used to plan it. These links help visitors move from project inspiration to relevant vehicle-specific categories.
Rolls-Royce brand
Rolls-Royce Parts
Browse vehicle-specific exterior, interior, braking, lighting and wheel upgrades for Rolls-Royce models.
Explore category Exterior PartsRolls-Royce Ghost Exterior Conversion
Examine bumper, grille, side and rear conversion details with vehicle-specific fitment guidance.
Explore category Interior PartsRolls-Royce Ghost Bespoke Interior
Review orange-and-black upholstery, steering, carbon dashboard and coordinated cabin craftsmanship.
Explore category Carbon FiberRolls-Royce Ghost Carbon Components
Inspect bonnet, intake, vent and lower-body carbon-fiber components in greater detail.
Explore category LightingRolls-Royce Headlight Development
Explore complete lamp assemblies, modules, housings and functional testing guidance.
Explore category Wheels & TiresRolls-Royce Custom Wheel Options
Review two-tone wheel design and the specifications required for made-to-order forged options.
Explore categoryFrequently asked questions
Before ordering a Rolls-Royce Ghost conversion
Is this conversion suitable for every Rolls-Royce Ghost?+
No universal fitment is assumed. Compatibility depends on the Ghost generation, model year, market specification, trim and existing equipment. OWNSILENT reviews the VIN and clear vehicle images before confirming a component list.
Can the exterior and interior conversion be ordered separately?+
Yes. Customers may request a complete project or selected exterior, carbon-fiber, interior, wheel or lighting components. Every quotation should identify the included parts clearly so the project scope remains controlled.
Can the orange-and-black interior design be changed?+
Yes, subject to material availability and engineering review. Leather colour, perforation, quilting, piping, stitching, embroidery and supporting trim direction can be discussed during specification approval.
Are all visible carbon-fiber components included automatically?+
No. Bonnet, vents, intake surrounds, side extensions and other carbon components must be listed individually in the official quotation.
Does the conversion retain original vehicle functions?+
Required sensors, lamps, controls and electrical functions must be identified during the pre-order review. Functional retention depends on the selected kit, donor vehicle specification and professional installation.
Is professional installation required?+
Yes. Large body panels, electrical components and interior systems should be installed by experienced technicians who can complete trial fitting, panel adjustment, wiring checks and final quality inspection.
How should I request an accurate quotation?+
Send the VIN, model year, market, exterior images, cabin images and a list of the required changes. Reference images can be included to explain preferred colours, materials and styling direction.
Is worldwide shipping available?+
Worldwide air and sea freight options are available after manufacturing. Packing method, shipment insurance, destination requirements and estimated transit time should be confirmed before dispatch.
Compatibility before production
VIN, current vehicle images and exact equipment are reviewed before confirming fitment.
Written specification control
Included components, materials, colours and visible finishes should be recorded clearly.
Packing and worldwide dispatch
Confirm protective packing, shipment insurance and air or sea cargo before dispatch.
Get In Touch
Plan your Rolls-Royce Ghost conversion
Send the VIN, model year, market, current vehicle images and required exterior or interior changes for a vehicle-specific specification review.
Usually replies within one business day · Handled by the OWNSILENT team
Prefer email? Reach us at sales@ownsilent.international