VIN and evidence review
Match the exact vehicle before confirming compatibility.
Rolls-Royce · Exterior Parts · Carbon Fiber Parts
Rolls-Royce Ghost Carbon-Fiber Exterior Components
A component-by-component Rolls-Royce Ghost carbon-fiber package covering the bonnet, bumper intakes, fender vents and lower side extensions, with material construction and visible finish confirmed in writing.
Carbon intake surround
The clear-coated weave creates contrast around the dark intake opening.
Written specification
Record component scope, material, colour and finish.
Quality checkpoint
Review visible details and supplied components before packing.
Worldwide delivery
Plan protective packing plus air or sea cargo.
Exact product and parts scope
Rolls-Royce Ghost carbon-fiber component scope
Visible weave does not prove construction method. Each order must state whether the component is full carbon, dry/prepreg carbon, wet-lay carbon or an overlay, together with the finish and mounting arrangement.
Carbon-fiber bonnet
Complete visible-carbon bonnet or specified bonnet section with central ornament area, underside construction and mounting points defined for the vehicle.
Front intake surrounds
Left and right carbon surrounds for selected lower bumper openings, coordinated with mesh, lighting and adjacent painted surfaces.
Fender and side vent trims
Paired carbon vent surrounds or inserts with the agreed brightwork relationship and left-to-right weave direction.
Lower side extensions
Carbon side-skirt extensions that continue the lower visual line between the front and rear conversion components.
Optional rear carbon details
Diffuser or rear trim pieces are supplied only when the exact component, construction and exhaust compatibility are listed.
Mounting and finish specification
Fasteners, bonding method, clear finish, edge treatment and any heat-related requirement are confirmed per component.
Important: only components named in the final written quotation are included. VIN review and professional trial fitting are required before paint, upholstery completion or electrical coding.
Product overview
Carbon used selectively to define the conversion
The project concentrates visible carbon in areas that already carry strong visual responsibility: the bonnet centreline, bumper intakes, side vents and lower body line. This creates a repeated technical theme without covering every surface.
The image gallery demonstrates visible weave, gloss finish and relationships with paint, mesh and metallic accents. Exact material construction and production method should be confirmed in the written specification rather than inferred from appearance alone.
Carbon components require accurate edge finishing and careful installation. Surrounding painted panels, seals and fixing points must be protected while technicians establish consistent clearances.
Product details and project views
Visible weave, edge finishing and installed relationships
Close cards make carbon weave, clear finish and adjoining surfaces easier to inspect without hiding details beneath text overlays.
Carbon intake surround
The clear-coated weave creates contrast around the dark intake opening.
Carbon side vent
A metallic accent separates the vent opening from the surrounding carbon surface.
Fender vent installed view
The installed image documents alignment against the painted fender.
Lower front intake
Carbon, mesh and highlight trim meet within a compact lower bumper assembly.
Carbon bonnet centre
The bonnet retains the vehicle's central visual axis around the Spirit of Ecstasy.
Bonnet ornament detail
A close view makes finish clarity and the ornament surround easier to examine.
Technical and specification guidance
What must be confirmed before production
Material specification
Dry, prepreg, wet-lay or overlay construction should never be assumed from a image. The quotation must state the supplied specification.
Weave direction
Left and right components should be reviewed for deliberate weave orientation and visual consistency.
Clear finish
Gloss, satin or other available surface finish should be approved together with expectations for depth and UV exposure.
Edge and mounting finish
Visible edges, concealed mounting surfaces and fastener locations influence both appearance and installation quality.
Heat and operating environment
Components near exhaust or high-heat areas require an application-specific material and clearance review.
Care after installation
Use suitable non-abrasive cleaning methods and inspect edges or fixings if the component experiences impact.
Customization and fitment
Built around the vehicle and approved specification
The gallery communicates design possibilities, while the order is controlled by a written vehicle-specific specification. The following areas should be reviewed together so visual choices do not conflict with fitment, retained functions or installation requirements.
Gloss or satin direction
Available finish choices should be coordinated across bonnet, vents, intakes and lower extensions.
Visible weave selection
Available weave pattern and direction can be specified where the manufacturing option supports it.
Selective component packages
Customers may request a focused set of carbon details or coordinate them with the complete exterior conversion.
Paint-and-carbon balance
The final plan should identify which surfaces remain painted and which use visible carbon so the result stays controlled.
Ordering workflow
From vehicle review to professional installation
- 01
Identify the vehicle
Share VIN, model year, market, trim and clear current vehicle images of the relevant areas.
- 02
Define the scope
List required components, functions, materials, colours and finish expectations.
- 03
Approve and inspect
Confirm the written specification and review available production or pre-packing evidence.
- 04
Ship and install
Choose suitable freight and arrange professional installation plus final function checks.
Part of the complete project
Return to the Rolls-Royce Ghost master conversion
The master page brings exterior, carbon, interior, lighting and wheel work together as one conversion story. Use the specialist pages for deeper product-family information.
View complete conversionFrequently asked questions
Questions about rolls-royce ghost carbon components
How is compatibility confirmed?+
OWNSILENT reviews the VIN, model year, market specification, trim and clear project images before confirming a vehicle-specific order.
Can I order only selected components?+
Yes. The official quotation should list every included component individually, including finish, quantity, supporting hardware and any confirmed functional requirements.
Is professional installation required?+
Yes. Luxury vehicle conversion components should be installed by experienced technicians who can verify fitment, clearances, electrical functions and final finish.
Is worldwide shipping available?+
Worldwide air and sea cargo options are available after manufacturing. Packing, insurance and destination requirements should be confirmed before dispatch.
Are these components confirmed as dry carbon?+
Not from appearance alone. Exact construction must be stated in the official quotation for each component.
Can carbon pieces be ordered without the full body kit?+
Selected pieces may be available separately, subject to vehicle fitment and confirmation of surrounding parts.
Get In Touch
Specify Rolls-Royce Ghost carbon components
Send the VIN, model year, required carbon areas and preferred visible finish for component and fitment review.
Usually replies within one business day · Handled by the OWNSILENT team
Prefer email? Reach us at sales@ownsilent.international