Vehicle identity
Brand, model, model year, VIN where required and current wheel/tire specification.
Design and visual direction
Wheel size and vehicle interfaces
Bolt pattern, bore and offset
Load, clearance and VIN review
Quotation and production scope
Forged Wheels · BMW
Seven BMW designs — a gunmetal mesh, a gloss black machined multi-spoke, a crossed X-spoke gunmetal pattern, a dark-tint multi-spoke, a satin gunmetal Y-spoke and two spider-web mesh designs in gloss black and satin gold.

Photographed designs
Every design below was photographed on its own wheel, and the BMW identification was confirmed by inspecting the physical center-cap badge in that photograph — never assumed from a filename or listing title. Open any design for its full finish description, forged construction detail and BMW fitment reference.

Gunmetal Multi-Spoke Mesh, BMW M
A dense Y-spoke mesh in satin gunmetal, center cap carrying the tricolor BMW M badge.

Gloss Black Multi-Spoke, Machined Face, BMW
Paired machined spokes over gloss black, hub badged with the standard blue-and-white BMW roundel.

Gunmetal X-Spoke, BMW M
Crossed X-pattern spokes in satin gunmetal with a machined lip, hub marked BMW M.

Dark-Tint Multi-Spoke, BMW
Paired V-shaped spokes finished in a dark smoked tint over gloss black, hub carrying the standard blue-and-white BMW roundel.

Gloss Black Spider-Web Mesh, BMW M
A fine radiating spider-web mesh in uniform gloss black, hub carrying the tricolor BMW M badge.

Satin Gold Spider-Web Mesh, BMW M Performance
The same fine spider-web mesh pattern in a satin gold finish, barrel marked M Performance, photographed on a plain studio backdrop.

Satin Gunmetal Multi-Spoke Y, BMW M
Slender curved Y-shaped spokes in uniform satin gunmetal, center cap carrying the tricolor BMW M badge.
Fitment reference
A single BMW forged wheel design is typically produced across several bolt patterns and size ranges to fit different models and years. The table below is a reference starting point — your exact hub bore, offset and load rating are confirmed against your VIN on enquiry.
| Model | Bolt pattern | Center bore | Size range |
|---|---|---|---|
| BMW M3 | 5x112 or 5x120 | 66.5mm to 72.6mm | 18x8.0 to 21x10.5 |
| BMW M4 | 5x112 | 66.5mm | 20x9.5 to 22x10.5 |
| BMW M4 CSL | 5x112 | 66.5mm | 19x10 to 20x9.5 |
| BMW M5 | 5x112 or 5x120 | 66.5mm to 72.6mm | 19x8.5 to 20x9.5 |
| BMW M8 | 5x112 | 66.5mm | 19x8.5 to 20x9.5 |
| BMW M760Li / M750Li | 5x112 or 5x120 | 66.5mm to 72.6mm | 19x8.5 to 20x9.5 |
| BMW M760e | 5x112 | 66.5mm | 22x9.5 to 22x10.5 |
| BMW X4 M | 5x112 | 66.45mm | 19x8.5 to 20x9.5 |
| BMW X5 / X5 M | 5x112 or 5x120 | 66.5mm to 74.1mm | 20x9.5 to 21x11 |
| BMW X6 M | 5x112 or 5x120 | 66.5mm to 74.1mm | 20x8.5 to 22x11 |
| BMW X7 | 5x112 | 66.5mm | 22x9.5 to 22x10.5 |
| BMW XM | 5x112 or 5x120 | 66.5mm | 22x9.5 to 22x11 |
Related pages
Product
Fitment
Product
Fitment
Product
Fitment
Get In Touch
Send your exact vehicle model, year, current wheel size and bolt pattern for technical review and quotation.
Usually replies within one business day · Handled by the OWNSILENT team
Prefer email? Reach us at sales@ownsilent.international
Fitment before manufacture
The center-cap badge identifies the photographed design family. The final wheel specification still depends on the exact vehicle, hub, brakes, tire plan and approved dimensional data.
Brand, model, model year, VIN where required and current wheel/tire specification.
Confirm the actual hub and bolt interface for the exact vehicle before manufacture.
Review wheel diameter, width, offset, backspacing and front/rear stagger against the intended tire package.
Confirm vehicle and axle loads so the wheel specification is appropriate for the application.
Caliper, rotor, suspension and body clearance should be checked before the final specification is approved.
Record design, finish, size, hub data, fastener interface, quantity and destination in the quotation.