VIN and factory brakes
Confirm model year and trim, existing rotor/caliper package, OEM references and axle requirement.
OWNSILENT · Lamborghini Huracán
Huracán Carbon-Ceramic Brake Rotor Replacement
A VIN-engineered aftermarket replacement for worn or cracked factory carbon-ceramic rotors, covering 2014–2024 Huracán LP 610-4, EVO, STO and Tecnica, built around the verified factory caliper, wheel package and existing brake hardware.
2014–2024 model yearsFactory caliper compatibleUp to 65% lighter than ironVIN-confirmed specification
Vehicle-specific C/SiC engineering
Reference system shown. Final hat geometry, hardware, pad shape and included components follow the approved Huracán specification.
2014–2024
model years covered
380–410 mm
front reference diameter
Up to 65%
lighter than iron
VIN-confirmed
final specification
Technical specification
Huracán replacement reference
These values cover the 2014–2024 Huracán range across trims. OWNSILENT does not release production from dimensions alone; the VIN and physical evidence from the existing rotor set must agree with the engineering record.
- Model years covered
- 2014–2024 · LP 610-4, EVO, STO, Tecnica
- Front rotor diameter
- 380–410 mm reference range, confirmed by VIN
- Rear rotor diameter
- 356–390 mm reference range, confirmed by VIN
- Rotor construction
- C/SiC friction ring with vehicle-specific aluminium hat
- Caliper compatibility
- Engineered for the verified factory carbon-ceramic caliper
- Axle coverage
- Front and rear, supplied separately or as a matched set
- Weight reference
- Up to 65% lighter than an equivalent iron rotor
- Fitment type
- Direct replacement after written engineering approval
- Verification
- VIN, OEM brake evidence and wheel-clearance review
Complete component schedule
What the replacement includes
The reference package combines the rotor assemblies and matched pads for the confirmed axle. The signed quotation controls the final inclusions, price and logistics.
Front and/or rear C/SiC rotor assemblies, matched to the verified Huracán configuration
Matched ceramic-compatible brake-pad set
Vehicle-specific aluminium hats and approved mounting hardware
Configuration for the verified factory carbon-ceramic caliper
Rotor and pad identification linked to the approved vehicle record
Pre-dispatch surface, dimension and hardware inspection
Installation and controlled bedding guidance
Protected worldwide export packing
Wheel clearance
Check barrel diameter, spoke profile and clearance around the full caliper and rotor assembly.
Factory-caliper compatibility
Confirm the pad shape, caliper part number and complete mounting relationship before release.
Professional installation
Complete torque, fluid, leak, bedding and final road-safety procedures with a qualified technician.
How OWNSILENT manufactures C/SiC rotors
Inside the carbon-ceramic production process
These production references document OWNSILENT's general carbon-ceramic manufacturing process — carbon-fibre preparation, preform production and precision machining. They are reference production photography and are not specific to this vehicle.
Prepared carbon strip cutting
This photograph documents continuous material handling at the cutting station without assuming the machine's unverified operating settings.
Layered carbon material feed
The visible roller path shows how broad prepared material is supported and advanced through the production line.
Carbon tow processing line
A clear factory overview reveals the scale and repeated tow paths of the carbon-fibre textile preparation area.
Frequently asked questions
Huracán carbon-ceramic replacement, explained
Why does a factory Huracán carbon-ceramic rotor need replacing?+
Carbon-ceramic friction rings wear down over time and can crack under impact, curb strikes or extreme track use. Once worn below minimum thickness or visibly cracked, replacement is required rather than resurfacing.
How does this compare to a Lamborghini dealer quote?+
A factory carbon-ceramic rotor set from a Lamborghini dealer is typically sold as matched, non-serviceable assemblies at a high reference cost. OWNSILENT manufactures a VIN-matched aftermarket C/SiC replacement engineered to the same factory caliper, at a lower reference cost confirmed after vehicle verification.
Can the factory calipers be retained?+
Yes, in the applications OWNSILENT supports the replacement rotor is engineered around the verified factory caliper. Its part number, mounting geometry, pad shape and condition must agree with the approved specification before production is confirmed.
Does this cover LP 610-4, EVO, STO and Tecnica?+
Yes, all are supported. Rotor diameter, thickness, offset, hat depth and caliper clearance are confirmed from the VIN and physical evidence rather than assumed from the trim name alone.
What information should I send for a quotation?+
Send the VIN, model year and trim, wheel size, clear photographs of the current rotors and calipers, and any OEM part numbers visible on the components.
Who should install the replacement?+
Installation, torque procedures, brake-fluid checks, bedding and final road-safety inspection must be completed by a qualified brake technician familiar with carbon-ceramic systems.
Get In Touch
Confirm your Huracán carbon-ceramic replacement
Send the VIN, model year and trim, wheel size, current rotor and caliper photographs, and any OEM references for a written fitment review.
Usually replies within one business day · Handled by the OWNSILENT team
Prefer email? Reach us at sales@ownsilent.international
