OWNSILENT
Low front three-quarter view of the Purosangue splitter, corner fins and side skirt
Ferrari Purosangue exterior styling with the bonnet, front aero and side profile in view. Confirm the exact components included in your quotation.

Ferrari Purosangue Carbon Fiber Exterior Parts

Build your exterior specification around a coordinated selection of carbon fiber parts for the Ferrari Purosangue. Explore the bonnet, front and rear aero, wheel-arch extensions and lower side trims in this component set.

Vehicle
Ferrari Purosangue
Visible carbon finish
Gloss woven pattern
Ordering
Configuration by enquiry

Send your model year, vehicle photos and required components so we can confirm the specification and fitment before order confirmation.

WhatsAppChoose My Parts

Choose the exterior parts for your build

Use these component groups to start your enquiry. The layout is a visual selection guide; your quotation confirms the exact supplied pieces, materials and quantities.

Bonnet / hood
Sculpted bonnet with exposed woven-carbon sections and grey outer areas.
Front bumper and lower splitter
Front assembly with separate lower lip, horizontal aero sections and corner pieces.
Rear diffuser and bumper trims
Carbon lower rear assembly with vertical diffuser fins and shaped side sections.
Wheel-arch extensions
Curved carbon pieces that follow the wheel openings; exact position and set quantities require confirmation.
Side skirts / sill extensions
Long lower exterior sections displayed alongside the arch and bumper components.
Additional exterior aero trims
Smaller shaped pieces and long trim panels; select each item by its corresponding photograph.

Explore the exterior kit, part by part

Compare each component with its close-up photograph, then use the ordering notes to define your specification. The images document loose parts before installation.

Purosangue bonnet with grey panels and exposed woven-carbon sections

Bonnet with exposed carbon sections

The bonnet combines grey outer areas with glossy woven-carbon sections and sculpted openings. Confirm the supplied finish and panel construction with your quotation.

Bonnet / hood

The bonnet is the largest upper-body panel in this layout. Its sculpted centre, openings and exposed woven-carbon areas establish the visual direction of the set, with grey sections framing the darker surfaces.

Before ordering: Confirm whether your quotation covers the complete replacement bonnet or selected carbon sections, the underside finish, hinge and latch provisions, and the final painted areas.

Enquire about this component
Carbon front bumper assembly with separate lower splitter and corner pieces

Front bumper, splitter and corner aero

The front assembly is displayed with a separate lower splitter, horizontal aero sections and small corner pieces. Final component names and quantities are confirmed against the selected configuration.

Front bumper, splitter and corner pieces

The front view separates the main bumper assembly from the low projecting splitter and smaller corner pieces. Horizontal sections and angled edges create a layered front-end treatment that can be reviewed clearly before choosing parts.

Before ordering: Request a marked photograph identifying every included front component. Confirm grille, camera, sensor and fixing provisions, plus the intended ground clearance with your installer.

Enquire about this component
Grey rear bumper with woven-carbon lower diffuser and vertical fins

Rear bumper and diffuser assembly

The rear bumper carries a contrasting carbon lower section, pronounced diffuser fins and shaped side openings. The grey bumper shell should not be assumed to be carbon fiber.

Rear bumper and carbon diffuser

The rear assembly combines a grey upper bumper with a dark lower section. Vertical diffuser fins, shaped corners and outlet openings are visible in the detail photograph. These styling features describe the component shape; no downforce or performance figure is claimed.

Before ordering: Confirm whether the bumper shell is included, the exact diffuser configuration, compatibility with the existing exhaust outlets, and any sensor or bracket transfer requirements.

Enquire about this component
Curved woven-carbon wheel-arch pieces beside a long side skirt section

Wheel-arch extensions and side skirt

Curved arch extensions and a long lower side section are laid out separately. Confirm front/rear position, left/right allocation and mounting requirements before ordering.

Wheel-arch extensions

The separate curved pieces follow the wheel-opening profile. Their broad surfaces make the weave and glossy finish easy to inspect. Several shapes are present, so the layout should be matched to an identified front/rear and left/right parts list.

Before ordering: Ask for the fitted position of each piece, the supplied quantity and the installation method. Discuss wheel and tyre clearance with the installer for your vehicle configuration.

Enquire about this component
Long woven-carbon trim panels with four black outlet surrounds and smaller aero pieces

Long exterior trims and outlet surrounds

This detail groups long exterior trim panels, smaller shaped pieces and four black outlet surrounds. The outlet surrounds are not identified as carbon fiber.

Side skirts, sill sections and smaller trims

Long lower exterior sections appear beside smaller shaped trims and black outlet surrounds. Use the detail view to distinguish full-length side components from short corner pieces and other finishing sections.

Before ordering: Identify the required pieces on the image rather than ordering by a general kit name alone. Confirm pair quantities, joining edges, mounting hardware and the material of each outlet surround.

Enquire about this component

Specify the carbon finish and painted sections

Gloss woven-carbon appearance

The selected photos show a repeating woven pattern beneath a reflective surface. Review the visible weave direction and how the finish carries between adjoining pieces. Ask for close-up approval photos of your selected configuration before the final specification is agreed.

Define each material separately

The bonnet and rear assembly combine exposed carbon areas with grey sections. Black outlet surrounds are also visible. Request a component-by-component material schedule that identifies carbon sections, painted or paint-ready areas, and any separate plastic or metal fittings where applicable.

If you prefer the irregular appearance of forged carbon, compare the Ferrari Purosangue forged-carbon kit. Confirm the selected design as a complete specification; matching vehicle names do not establish that components from different kits can be mixed.

Confirm the specification before installation

Share the vehicle year, destination market and photos of the current bumpers, bonnet and wheel arches. Ask us to confirm panel replacement or overlay construction, fixing points, sensor and camera provisions, and any fitting adjustments for the selected parts.

The set includes exposed woven-carbon surfaces alongside grey panels and black outlet surrounds. Confirm each selected part’s material and finish in writing. Arrange professional installation and check supplied pieces against the agreed configuration.

From your parts selection to a clear quotation

  1. Share the vehicle and chosen parts

    Send the model year, market specification, exterior photos and a marked list of the components you need. Include the delivery country and any existing modifications relevant to fitment.

  2. Agree the supplied configuration

    Review materials, finish, quantities, mounting provisions, fittings and installation responsibilities. Confirm price, availability, preparation time and shipping in the written quotation.

  3. Plan receiving and professional fitting

    Arrange an installer before delivery. Check received components against the agreed list and discuss trial fitting, paint preparation and final alignment before permanent installation.

Purosangue carbon exterior parts: your questions

Which Ferrari Purosangue carbon fiber parts are shown?

The component layout includes a bonnet with exposed carbon sections, a front bumper assembly and separate splitter, a rear bumper with lower diffuser, curved wheel-arch pieces, long side sections and smaller exterior trims. A quotation confirms the exact supplied pieces and quantities.

Can I enquire about individual components?

Yes. Identify the bonnet, splitter, diffuser, arch pieces or trims you are interested in, ideally with a marked photo. Our team can confirm whether those items can be supplied separately or require adjoining components.

Is every part in the layout made from carbon fiber?

The images show woven-carbon surfaces alongside grey panels and black outlet surrounds. Do not assume that every displayed piece has the same construction. The material and finish of each ordered component should be listed in the quotation.

Is this dry carbon or forged carbon?

A woven pattern is visible on the exposed surfaces in this set. The photographs do not establish the production method or resin system, so dry-carbon, prepreg and autoclave construction must be confirmed separately. The separate forged-carbon Purosangue page covers a different visual finish.

Which model years does the kit fit?

An exact model-year range has not been confirmed for this set. Send your Purosangue model year, market specification and current exterior photos. Share the VIN privately when requested so the selected parts can be checked before order confirmation.

Does the kit include brackets, sensors and exhaust tips?

The photos are a component-selection guide, not a confirmed packing list. Ask for written confirmation of all brackets, fasteners, grilles, sensor mounts, outlet surrounds and other fittings included with your chosen configuration. Existing equipment may need to be transferred; confirm this with your installer.

Can you confirm price, availability and delivery time?

Request a quotation with the required components, finish, delivery country and vehicle details. Price, availability, preparation time and shipping arrangements are confirmed for that specific selection before an order is placed.

How should installation be arranged?

Use a professional bodywork or vehicle-modification installer. Before paint or permanent fitting, have the installer check the supplied pieces, mounting provisions, panel alignment, clearances and any sensor or camera requirements against the agreed configuration.

Request your Purosangue parts quotation

Tell us which parts you need, your preferred finish and delivery country. Include the vehicle year and photos; share the VIN privately with our team when requested.

WhatsAppRequest a Quotation

Browse Ferrari parts and the Purosangue model catalogue. Exact year compatibility is confirmed with your quotation.

Explore our carbon fiber parts or compare the separate Purosangue forged-carbon kit.

0% read